Technical Description of Shanghai Muxiang Lift System
Equipment name: Lifting device
1. Basic technical parameters required for conveying equipment:
1. Pallet size: L1200*W1100
2. The shape of the maximum conveyed goods is L1800*W1500*H3000
3. Two-layer/three-layer hoist speed: 60 pallets/hour
4. Four-layer hoist speed: 50 pallets/hour
5. Five-layer hoist speed: 45 pallets/hour
6. Maximum product weight: 1500Kg
7. The effective stroke of the elevator: 20000mm
2. The working process of elevator and conveying device is as follows:
Manually select the floor conveying mode → manual forklift pick up the goods → put the roller line on the first floor → start the roller line → enter the car (when the car is in place) → start the hoist → start the roller line when the car is in place. (When the car is in place) When there are products in the box and on the outlet roller line, the equipment is in the waiting state, and the inlet and outlet rollers have waiting positions)
Note: 1. The previous action has not been completed, and the next action will not be performed today.
2. The elevator can also be transported in reverse with the above process
3. Manually select the transmission mode on any floor
3. Lift
1. Lift quantity: 1 set
1) Overall dimensions of the lift: 2500mm wide*2500mm deep*26500mm high
2) Inner cage size: width 2100mm* depth 2800mm* height 3000mm
3) Elevator effective stroke: S=20000mm
4) Lifting speed of elevator: V=30m/min
5) Three-story elevator power: 3ph, 380v, 50HZ, German SEW brand K series 11KW decelerating motor with brake.
6) The elevator adopts 4 standard chains of 20A and pitch P=31.75mm to carry goods.
7) The main frame of the elevator is made by welding with 120mm*120mm*5mm square tubes, and the surface of the frame is painted.
8) The frame of the hanging cage is made of 80X40 square steel pipe and the surface is sprayed with plastic.
9) Urethane buffers are used at the bottom to reduce the impact of the cage on the bottom frame.
Post time: Mar-19-2021